[ad_1]
If you are a fan of film photography but don’t want to just spend hundreds of dollars on a film body then you should read to the end of this article!
This article will provide you with 10 Nikon film bodies that won’t break the bank.
Whether you are looking for a classic film body from the 90s or something more recent, this list has got you covered.
Each of these Nikon film body models is reliable and budget-friendly, so you can be sure that you’ll get good value for your money.
10 Nikon Film Bodies
1. F50 (N50)
Nikon released the F50, also known as the N50 in North America, in 1994. It is a 35mm film SLR camera. It was designed with the entry-level amateur autofocus SLR market in mind.
The F50 has several “programs,” TTL light metering, and autofocus. However, it was unable to be measured via non-CPU lenses.
After the release of the return camera, Nikon introduced the F50 as their entry-level model.
Nevertheless, it could only use the older, slower AF-D autofocus mechanism, unlike the F90 and F70. It actually uses the same single focus point 6 zone matrix metering AM200 module as the F-401X, which it succeeds.
In general, it works nicely in use, but it takes some finesse to perform tasks like an AEL lock.
Overall, this is a good camera that has minor upgrades over the model it replaces.
2. Nikon F-601M (N6000)
This is, in a sense, the most sophisticated manual focus SLR Nikon has ever made.
It is the replacement for the renowned Nikon FA with an F-601 (N6006) and matrix metering, but it also has a manual focus screen and no AF module.
It is a typical 1990s plastic-bodied LCD-controlled camera with motor drive & DX coding that lacks a built-in flash but is suitable with speedlites.
3. Nikon F-401 (aka N4004)
With dials for both shutter and aperture settings on the top plate, this film body also has a distinctive look.
It is however notable for being the first Nikon camera to feature an integrated TTL flash.
This bulky frame of an 80s camera also sounds and looks more professional than it actually is.
4. Nikon EM
This is the first Nikon to employ polycarbon material and is also the tiniest, lightest film SLR body ever made by Nikon.
When it first came out, it didn’t cause much of a stir, but now some consider it to be a classic that got lost in the shuffle.
This film body is sturdy and works well as a backup body. It can be operated essentially manually in the flash mode at 1/90, but if the batteries are removed and the camera is left in Auto, it will shoot at 1/1000.
You May Like: Best Nikon Apps For Android And iOS In 2022
5. Nikon F60 (N60)
The Nikon F60 replaced the F50 series and has a more contemporary design with a more conventional mode dial and command thumb dial.
In terms of layout, it is a lot superior camera than the F50, but in terms of technology, it is essentially an 80s-era camera in a 90s-era body.
Although the camera’s body is made of plastic, its core seems heavier and more sturdy than those that came after it.
Like the F-50 and F-401 series, it performs best when used with older AF or AF-D lenses because more recent AF-I/AF-S lenses can only meter rather than autofocus.
6. Nikon F55 (N50, U)
The Nikon Multi-CAM 530, a new AF/metering module, upgrades the specifications of this inexpensive camera, which superseded the F60.
This film body is thin and lightweight, and it looks and feels like a contemporary dSLR. However, it is not as durable as the earlier F50. It’s noteworthy that the lens mount is made of plastic.
Moreover, it has a wider variety of functions than the F60. The Nikon F55 is a good option if you don’t mind using a film body without AF-S capability but still want to save money.
7. Nikon FE10
This one is essentially a Cosina camera that was based on a design created 20 years prior.
This is due to the fact that by the middle of the 1990s, AF bodies for Western markets were the main focus, but there was still a market for simpler, entry-level cameras for both film and art college students.
Cosina was able to produce an affordable SLR for these markets, not Nikon, and this was 20 years before Cosina introduced the CT-1.
As a result, Cosina built a variety of cameras for other brands, such as Nikon, Canon, and Olympus, using the CT-1 models as a base.
It was one of only two film SLRs sold after 2006 and was among the cameras made by Cosina for Nikon, along with the FM10 and FE10.
The 1996 FE10 is the FM10’s electronically controlled shutter sister; it offers manual and AP modes for any AI lens with an aperture ring and a reliable centre-weighted meter.
In contrast to conventional Nikon manual focus cameras, this Nikon film body dies once the battery fails and is made of a lot of plastic.
8. Nikon F65
The Nikon F65 has several features, including top-notch specs, support for bAF-D and AF-S as well as VR.
The Nikon Multi-CAM 900 module offers 6-segment 3D matrix metering in addition to 5 points of AF. The D50, D70, and D100 dSLRs also employ the same module.
It has a wide variety of lens support, although it is not as capable as the Nikon F60 film body and its flash sync slows from 1/125 to 1/90.
9. Nikon F-301 (N2000)
The F-501 (N2020), introduced by Nikon, was the first widely used SLR with autofocus. Despite offering the FE2, FM2, FA, and FG20 simultaneously, Nikon executives for some reason thought that there should be a manual model to match.
Just an F-501 without the AF control motor and electrics makes up this film body and It’s a pretty era-appropriate camera.
It lacks matrix metering but includes Nikon’s legendary centre-weighted system and will handle practically all AI class lenses, including G class lenses with the exception of AF-P lenses.
10. Nikon F75 (N75, U2)
This Sony camera is a middle-of-the-line consumer model. It features a great deal of important equipment that was acquired from prior cameras, and it has a 35-segment 3D matrix metering system in addition to the F65’s 5 focus point CAM900 AF unit.
It has features like DoF preview and LCD illumination and is vastly more ergonomic.
It includes roughly 85–90% of the F5’s features and 95% of the functions you’d ever need to use. All AF lenses up till the newest AF-P and electronic diaphragm variants are compatible with it.
Conclusion
No doubt, Nikon’s film bodies offer everyone a variety of options that won’t break the bank.
Whether you’re a beginner in photography or a seasoned professional, there is a Nikon film body from this list to fit your budget and needs.
So which of these film bodies are you going for? Share with us in the comments section, we’ll love to know!
FAQ
Which Nikon Camera Has Focus Stacking?
D850. The helpful “focus shift” function of the D850 is mostly utilized to produce the focus stacking shots, which are then combined in optional third-party software to produce a final image with a shallow depth of field.
What Was The Last Film Camera Made By Nikon?
the F6
The Nikon F5, which was produced from 1996 to 2004, was succeeded by the F6. Any Nikon F-mount lens with complete metering capabilities, excluding non-AI, can be used with it. The F6 was the final SLR film still in production at the time it was discontinued.
Which Nikon Cameras Have Image Stabilization?
Nikon Z7 II
With an expanded ISO of up to 102,400 and a five-axis in-body image stabilization system, it has a wide dynamic range and can stabilize pictures by up to five stops.
Does Nikon Have In-body Stabilization?
All NIKKOR Z lenses that you use with Nikon full-frame mirrorless cameras have access to strong in-body 5-axis VR image stabilization. Utilizing yaw, pitch, and roll, as well as X and Y axis in addition to the other 5 axes to stabilize your photos.
[ad_2]
Source link
