[ad_1]
Back in the day, the most prime piece of hardware you could have was a Sony Trinitron monitor. These beauties were massive, razor-sharp, and had a perfectly flat display, which was a rarity back then. They eventually went the way of the dodo, but now a modder has found a new use for one by building a custom PC inside its cavernous remains. He even added a bit of flair with see-through panels, built-in fans, and rigid tubing for the liquid cooling system.
The finished PC is branded Oazis ROG courtesy of the builder, a 55-year-old man from Hungary named János Kerekes. He says he built it for a friend who sells monitors and wanted a PC inside one of them, according to an interview on CustomPC (via PCGamer). The customer provided all the hardware from Asus, hence the name and ROG branding. The build involved hollowing out the monitor, then creating custom mounting brackets for all the hardware—midrange parts chosen for their ability to fit inside the monitor instead of performance.
The PC is cooled by a custom EK hard tubing kit.
Credit: CustomPC
Inside is an Intel Core i7-6700 CPU, an Asus AMD Radeon R9 Nano GPU, an Asus Maximus VIII Impact mini-ITX motherboard, a 750W PSU, and liquid cooling with custom rigid tubes to make it fit just right. Hollowing out the monitor was the most challenging part of the build, says Kerekes, which he says was a “headache,” as the 110-pound monitor was full of parts that took some force to remove. Once it was empty, he carefully installed the PC components in the right positions to prevent the monitor from tipping over, as it’s pretty front-heavy.
It wasn’t as simple as placing the components inside, though. Plenty of customization and elbow grease was required. For the display, he installed an Asus 24-inch IPS LCD with its frame removed so it would sit flush on the front. He expanded the opening to make it fit perfectly. He then modified the Asus monitor’s control panel to align it with Sony’s original, which required some ingenuity.
The modder removed the fans’ housings and mounted them directly in the top of the monitor.
Credit: CustomPC
Beyond that, he created custom brackets for the EK liquid cooling system and a custom I/O shield. Custom plexiglass panels are built into the top and sides of the monitor to view the hardware. He also installed 120mm fans without their casings to add some airflow. Possibly the most ingenious modification was the use of two hidden power supplies. One powers the display while the other runs the PC, and the monitor’s on/off switch also turns the PC on.
You can read all about the build in the lengthy interview with CustomPC. The modder says he’s happy with the build, but like any project, there are always things he wishes he had done better or differently. Still, it’s an impressive effort despite the rig’s midrange hardware.
[ad_2]
Source link
