[ad_1]
Mounting a Tv on a wall can seem like a huge project to take up and you might be tempted to call a technician to get it done. On the contrary, mounting a Tv isn’t so hard. You could make it a family activity.
To further help you mount your Tv without hassle, this article provides steps on how to mount a Tv on a wall safely.
A wall-mounted TV offers a variety of advantages, including a more aesthetically pleasing design and improved ergonomics for more pleasurable viewing.
Additionally, it can stop a TV from toppling over, which poses a safety risk if you have young children or animals who like to climb close to the TV stand.
It is also quite inexpensive, with many top-notch mounting alternatives going for $100 or less. Plus, it’s the same process with each Tv or wall type, the difference if any would not be so significant.
As we’ve mentioned, this article will show you how to mount a Tv safely, but first, let’s look at the tools you need.
Tools You’ll Need to Mount A TV On A Wall Safely
Here are some materials you should have before beginning the installation of your TV mount:
- Stud finder: For best stability, attach your TV to a stud rather than drywall unless you want a TV tragedy. Otherwise, you can have a costly disaster on your hands.
- Power drill: Mounting the TV could take some time if you do it with a screwdriver. For this endeavour, a power drill will help move things along more quickly.
- Different drill bits
- Level: Make sure your newly installed TV is, well, level by using a level. This can prevent you from having a misaligned TV and from making needless holes in your wall.
- TV mount: You need a TV mount that has been approved for your model of TV to install your TV to your wall.
- Painter’s tape: Although not compulsory, you can mark the wall studs you’ve located with a little piece of painter’s tape.
Steps to Mount a TV on a Wall Safely
- Determine The Location of the TV.
For the finest visual quality, viewing angles are frequently crucial, so carefully evaluate your location. In addition to being more labour, moving the TV after the fact also leaves empty holes in your wall. Since a fireplace is usually the focal point of the room, placing a TV over one is a common choice.
2. Locate the Studs
After choosing the ideal location for the bracket on the wall, you must locate the studs to fix it securely. Your TV wall bracket will have the structural stability needed to sustain a TV that may weigh between 30 and 100 pounds if you mount it to the studs.
You can either use a cheap stud finder or other methods. To figure out how many studs you’ll need, measure the TV bracket’s mounting points.
Most of the time, it will consist of a span made up of two studs, one on each side. It might need to span three studs, depending on the characteristics of your walls and the TV mount you’ve chosen.
Read more: How To Delete A File From A Computer In 2023
3. Mark Where The Hole is.
Next, you must indicate the precise location of the wall screw holes. The best way to ensure that these marks are even between the two studs and that the quantity won’t be tilted is to use a level.
You can either tape paper over the desired mounting site and mark particular areas for the pilot holes using a pencil on the wall itself, a pre-printed template, or your markings.
4. Make Pilot holes
You must drill pilot holes through the drywall and into the studs in the right locations using a drill.
5. Accurately Mount The wall bracket
The wall bracket will be secured with the provided mounting screws after the pilot holes have been drilled. To firmly fasten the bracket to the wall, insert the wall screws into the studs using a power drill, screwdriver, or ratchet.
6. Attach the Tv Mount to the wall.
The TV will be mounted on the wall using this second portion of the TV mount, which will first attach to the TV’s back and then join the wall bracket.
The two pieces may be joined together using a straightforward clip, a rail system, or even an extending arm, depending on the sort of mount you are employing.
Match the VESA mounting holes on the rear of the TV chassis with the TV mounting plate. With the help of a screwdriver, fasten the mounting plate to the TV by using the screws that ought to have been included with your TV mount.
7. Connect the Wall Bracket and the TV Mounting plate.
All that is needed to do is join the two now that the wall bracket and TV mounting plate are both firmly in place.
To lower the TV and attach the bracket and plate, raise it to the right height or just above where it is supposed to be.
Use the accompanying fasteners to secure the plate to the bracket, and be sure that you stick to the TV mount’s instructions.
8. Set Up the TV on the Mount.
When attaching a TV, connect the mounting hardware on the back to the mounting hardware fastened to the wall.
As you are about to make final adjustments, hold off on tightening anything completely. Make sure the TV is level by placing the level on top of it.
Once leveled, make any necessary changes and tighten the screws, nuts, and other hardware.
Conclusion
At this point, we’re certain you now have an idea of how to mount a Tv on a wall safely.
A TV wall mount is a terrific way to generate space in your house and give it a clean, contemporary look. However, it’s crucial to do it safely to prevent breaking your TV or hurting yourself or others.
You can make sure that your TV is installed securely and safely by following the advice and instructions provided in this article.
Every step, from picking the appropriate wall mount to deciding where to put it to utilize the appropriate equipment, is crucial.
So, get into it! If you have any questions, please feel free to share them in the comments section.
FAQ
Can I mount the TV directly on the wall?
With fixed, swivelling, or full-motion mounts, flat-screen TVs may be fastened to any wall. Although having solid studs to mount to is usually preferable, you can still mount most TVs to hollow walls concealed under the drywall.
How should a TV be mounted on the wall?
Since LED TVs are made to be viewed directly in front, it is recommended to mount your TV on the wall in front of your viewing area. Consider using a full-motion TV bracket if the TV is installed in a corner or off-centre from your seating area so you may adjust the TV for a better viewing angle.
How do you know if your wall can hold a TV?
To establish where you may hang the TV, make use of a stud finder to identify the studs on your wall. Never try to hang it using drywall anchors because the anchors will eventually rip through the drywall, causing your TV to fall to the ground.
Should the TV be Flat On the wall?
The extent to which a TV wall mount should be angled depends on the room’s viewing angle and individual preferences.
As a general rule, it is advised to tilt the TV somewhat downward if it is installed higher on the wall and slightly upward if it is mounted downward.
Do TV Mounts Leave big holes?
Yes, they might. However, a correctly placed TV won’t leave behind many holes.
Larger holes can raise suspicion when it’s time to leave, but smaller ones may go unnoticed by the house owners.
Is it Better to Wall Mount a TV or put it on a stand?
Although it may appear dangerous to hang a TV from the wall, wall-mounted TVs are highly secure and are often safer than those that are placed on TV stands.
What is the Best position for a TV?
The usual guideline is that you should place your eyes on the screen of your TV about one-third of the way down from the top. People’s heads are frequently visible in this area of the screen because there is typically where the action occurs.
[ad_2]
Source link
